M/s Ankur Technocrats - OEM Manufacturer from India

Introduction

Our Quality Control Standards

We pay paramount importance to the quality aspect of our cables and ensure that they meet the international standards in terms of functionality and durability. Our team of quality control personnel make optimum use of the available testing equipments and ensure that they meet the laid down quality parameters. Some points on which our products are tested include:

PROCESS	TO CHECK
Rod Rolling stage	Tensile strength & elongation.
Wire Drawing	Diameter and surface of Single Wire. Tensile Strength and Wrapping test on Aluminum wires. Wires and elongation on annealed copper wire. Resistance of the Wire
Stranding	Electric Dimension of the Conductor, Lay ratio. Surface of the Conductor. Electric Resistance of the conductor
Extrusion (Insulation)	Insulation thickness Eccentricity of the insulator Spark testing
Laying up	Sequence of Cores Circularity of Cable Laid up diameter Direction of Lay.
Inner Sheathing	Thickness. Diameter over sheath.
Armouring	Number and size of armour wire/strip Lay/direction of lay. Uniformity and circularity of wires Diameter over armoring.

Extrusion	Sheath thickness.
(Outer Sheathing)	Concentricity and overall diameter of the cable & finish surface. Embossing.

Further all the cable drums that leave our works undergo following tests at final stages of manufacture. Some of the routine tests carried out by us include:

• Conductor Resistance tests
• High voltage

We also carry out a wide range of other tests that enables our products meet the prevailing international standards. Some of them include:

Annealing test (Copper)	Tensile test (Aluminum)	Wrapping test (Aluminum)
Conductor Resistance tests	Test for armour wires	Test for thickness of insulation & sheath
Physical test for insulation, sheath	File resistance test	Test for bleeding & blooming of pigments